Quality /Environment Policy：
The OPT Quality/Environment management(QEMS) program is structured and certified by the well recognized Industrial Quality Management Systems. A primary objective of our Quality Management Program is to drive continuous improvement throughout the entire organization. The system operates on "Management by Metrics philosophy" basis, and the function failure rate shall be less than 500PPM at our customer site.
1.Quality policy
High quality, Competitive Price, Speed, Satisfaction
2.Environment policy
Reduce energy wasted, continuous development, Minimized pollution, create a harmonious environment.
Quality control
Additional quality aspects on-progress :
- APQP, PPAP, FMEA & MSA
- Statistical Process Control (SPC)
- Data Sharing
- Six Sigma Methodology
- Continuous Improvement
Reliability test
Normal Reliability test |
NO |
Test Item |
Test state |
Test Conditions |
Test Hours / Cycle |
Sample /Size |
Ac/Re |
1 |
Solder Heat |
Motionless state |
TEMP:260°C±5°C |
10 SEC |
22 PCS |
0/1 |
2 |
DC Operating Life |
Development |
TEMP:23±5°C IF=20mA |
1000 HRS |
22 PCS |
0/1 |
3 |
High Temperature Storage |
Motionless state |
TEMP:105°C |
1000 HRS |
22 PCS |
0/1 |
4 |
Low Temperature Storage |
Motionless state |
TEMP:-35°C |
1000 HRS |
22 PCS |
0/1 |
5 |
High Temperature High Humidity |
Development |
Ta= 65±5°C
RH= 90 ～ 95% |
240 H ± 2H |
22 PCS |
0/1 |
6 |
Temperature Cycle |
Development |
H:+65°C; RH:95%
H:105°C1H
∫: 10MIN
L:-25°C 1H |
40 CYCLES |
22 PCS |
0/1 |
7 |
Thermal Shock |
Motionless state |
H:+105°C 30min
∫：1—3MIN
L:-35°C 30min |
20 CYCLES |
40 PCS |
0/1 |
|
| 
